Details
Long time not make the decoration on your house? Take wall sticker for a try to bring fresh feeling into your space. It is quick and easy to use, simply peel and stick to most hard and smooth surfaces (wall, bathroom, door, window etc.). Further more, it is no paint, no tools and no sticky paste necessary.
Color Card (use for pattern color, background is transparent):
Note: Color you see could be affect by screen setting. Therefore, the color you receive might be a little different to what you expected. 7013 is coffee color, 7003 is blackish green color,7105 is black color, 7045 is dark blue color, 7104 is bitter chocolate color, 7102 is pure white with no different.
User Guide:
General Application of Wall Sticker
STEP 1: Make sure the desired position on the wall is smooth, clean and dry. Then use masking tape to fix the sticker on desired position--two vertical masking tapes at the top and a centre masking tape as picture showed. If wall sticker is too large, maybe more masking tape is needed for the fixture of wall sticker.
STEP 2: Slowly and carefully peel the top layer (application tape) at about 45 degree angle starting at one corner, then separate it from white backing and remove the two top masking tapes. Remember to peel off the top layer toward yourself but not fold it, leave it nature. It is required to make sure that the sticker lifts cleanly from the white backing.
STEP 3: Cut the separated white backing paper off but still leaving the application paper and sticker. While cutting basking paper, try to prevent the sticker from touching the wall or other things at this step.
STEP 4: Using a flat object, like a squeegee or plastic card such as Credit card, to rub transversely across the top half sticker at a 45 degree angle to pushing the air out. In this process, remember rud from the middle of whole sticker to top, and slowly to do so for avoiding any air bubble.
STEP 5: Remove the centre masking tape, and do the same thing but rud from centre to bottom direction to the bottom half of the sticker.
STEP 6: Rub over the whole sticker firmly to make sure it's stuck to the wall well, and leave it for a few minutes.
STEP 7: Slowly peel back the top layer (application tape) at a 180 degree angle back on itself making sure the sticker stays on the wall, if the sticker comes away then re-squeegee the sticker.
STEP 8: Stand back and watch your wall sticker, enjoy the feeling it bringing to your space!
Color Card (use for pattern color, background is transparent):
Note: Color you see could be affect by screen setting. Therefore, the color you receive might be a little different to what you expected. 7013 is coffee color, 7003 is blackish green color,7105 is black color, 7045 is dark blue color, 7104 is bitter chocolate color, 7102 is pure white with no different.
User Guide:
General Application of Wall Sticker
STEP 1: Make sure the desired position on the wall is smooth, clean and dry. Then use masking tape to fix the sticker on desired position--two vertical masking tapes at the top and a centre masking tape as picture showed. If wall sticker is too large, maybe more masking tape is needed for the fixture of wall sticker.
STEP 2: Slowly and carefully peel the top layer (application tape) at about 45 degree angle starting at one corner, then separate it from white backing and remove the two top masking tapes. Remember to peel off the top layer toward yourself but not fold it, leave it nature. It is required to make sure that the sticker lifts cleanly from the white backing.
STEP 3: Cut the separated white backing paper off but still leaving the application paper and sticker. While cutting basking paper, try to prevent the sticker from touching the wall or other things at this step.
STEP 4: Using a flat object, like a squeegee or plastic card such as Credit card, to rub transversely across the top half sticker at a 45 degree angle to pushing the air out. In this process, remember rud from the middle of whole sticker to top, and slowly to do so for avoiding any air bubble.
STEP 5: Remove the centre masking tape, and do the same thing but rud from centre to bottom direction to the bottom half of the sticker.
STEP 6: Rub over the whole sticker firmly to make sure it's stuck to the wall well, and leave it for a few minutes.
STEP 7: Slowly peel back the top layer (application tape) at a 180 degree angle back on itself making sure the sticker stays on the wall, if the sticker comes away then re-squeegee the sticker.
STEP 8: Stand back and watch your wall sticker, enjoy the feeling it bringing to your space!
| Main Features |
|
|---|---|
| Specifications |
|
| Package Contents |
|
You may also be interested in the following product(s)
Questions on Romantic Love Heart Balloons Pattern DIY Adhesive Wall Sticker
No questions asked yet
Ask Your Own Question
Related Products
